Construction garbage drum dryer

Application：Granular and powder drying of chemical, metallurgical, building materials, mining and other industries.

Material：It is suitable for drying magnetic and heavy ore concentrates of metals and non-metallic minerals, clay in the cement industry and slime in coal mining industry.

Input Capacity(t/h):12.14

Output Capacity(t/h):8.57

Vaporization (t/h):3.57

Temperature (℃):280±30℃

Total Power(KW):155

Over view
image
Benefit
Specifications

Get quotation

The tumble dryer, also known as the tumble dryer, is a drying device that is widely used in mining equipment. Divided into direct heat transfer drum dryer and indirect heat transfer drum dryer.

It is suitable for drying magnetic and heavy ore concentrates of metals and non-metallic minerals, clay in the cement industry and slime in coal mining industry. It is characterized by high productivity and easy operation. The drum of the drum dryer is a horizontal rotary cylinder. The inside is welded with various types of copyboards with different staggered angles from front to back. The rotary kiln body is inlaid with different types of refractory bricks according to requirements, and the feeding end is prevented from falling. The material is provided with a door ring and a spiral copy board.

The dryer is made up of a large, rotating cylindrical tube, usually supported by concrete columns or steel beams. The dryer slopes slightly so that the discharge end is lower than the material feed end in order to convey the material through the dryer under gravity. Material to be dried enters the dryer, and as the dryer rotates, the material is lifted up by a series of internal fins lining the inner wall of the dryer. When the material gets high enough to roll back off the fins, it falls back down to the bottom of the dryer, passing through the hot gas stream as it falls. This gas stream can either be moving toward the discharge end from the feed end (known as co-current flow), or toward the feed end from the discharge end (known as counter-current flow).

image

Benefit

1) PLC smart control & high automaticity. The performance of rotary dryer and moisture content of dry materials is automatically controlled in stable states.

2) High heat efficiency. The design of multiple circumferential flights combination and flow rate adjustment devices ensure the control of drying period and temperature distribution. The effect of insulation is as high as 70% and raise the heat efficiency by 20%.

3) Four wheel drive, more steady and stable.

4) Save 50% space compared with traditional dryers and reduce 50% civil investment.

5) Convenient variable frequency control systems. Customer could change the material flow rate and product moisture based on their need.

6) Environmental and safe. Modular configuration of dust collection and purification systems

7) More choice for novel air furnace with high efficiency, convenient manipulation and energy control, which could reduce 30% energy cost and 20% electric cost.

Leave Message

Specifications

Model(mm)	Slope( ％ )	Speed(r/min)	Temperature( ℃ )	Power(kw)	Capacity(t/h)	Weight(t)
Ф600×6000	3-5	3-8	≤700	3	0.5-1.5	2.9
Ф800×8000	3-5	3-8	≤700	4	0.8-2.0	3.5
Ф800×10000	3-5	3-8	≤700	4	0.8-2.5	4.5
Ф1000×10000	3-5	3-8	≤700	5.5	1.0-3.5	5.6
Ф1200×10000	3-5	3-8	≤700	7.5	1.8-5	14.5
Ф1200×12000	3-5	3-8	≤700	11	2-6	14.8
Ф1500×12000	3-5	2-6	≤800	15	3.5-9	17.8
Ф1800×12000	3-5	2-6	≤800	18	5-12	25
Ф2200×12000	3-5	1.5-6	≤800	18.5	6-15	33
Ф2200×14000	3-5	1.5-6	≤800	20	8-15	41
Ф2200×18000	3-5	1.5-6	≤800	22	10-18	53.8
Ф2200×20000	3-5	1.5-6	≤800	30	12-20	56