HOME > PRODUCTS > Crusher >
Heavy hammer crusher

Heavy hammer crusher

Application:Cement, mining, coal preparation, power generation, chemical and building materials industries.

Material:Breaking a variety of medium hardness and brittle materials. Such as limestone, coal and other materials.

Heavy hammer crusher

The heavy hammer crusher is one of the crushing equipments. One of the more advanced technologies in the hammer crusher series in the industry adopts advanced production technology to realize one-time feeding molding, which is characterized by high efficiency, energy saving and environmental protection. The material can be adjusted according to the demand, coarse, medium, fine, and various specifications; no sheet, no smooth body, multi-angle and multi-edge to maintain the compressive strength. It is especially suitable for highways, buildings and large-scale engineering materials. The crusher removes the initial breaking process of the E-type machine and becomes a new type of crushing material of large and small materials at one time. The output is large, the efficiency is high, the power is small, the manpower and material resources are saved, and the crushing cost of the material is reduced. The broken stone of the machine is not only full-scale, but also uniform, and it is an alternative product for the old-fashioned E-breaker and the plate hammer. This series of products is suitable for crushing a variety of medium hardness and brittle materials. Such as limestone, coal and other materials. Mainly used in cement, mining, coal preparation, power generation, chemical and building materials industries.

The device can adjust the purlin gap according to the user's requirements and change the granularity of the discharge to meet the different needs of different users. The fast-rotating hammer body and the material collision surface break the material, which has the characteristics of simple structure, large crushing ratio and high production efficiency, and can be used as a dry and wet crushing device. The main working part of the machine is a rotor with a hammer (also known as a hammer). The rotor consists of a main shaft, a disc, a pin and a hammer. The motor drives the rotor to rotate at high speed in the crushing chamber. The material is fed into the machine from the upper feed port, and is crushed by the impact, impact, shearing and grinding action of the high-speed moving hammer. In the lower part of the rotor, a sieve plate is arranged, and the size of the pulverized material smaller than the mesh size is discharged through the sieve plate, and the coarse-grained grade larger than the mesh size is retained on the sieve plate and continues to be struck and ground by the hammer, and finally passed through the sieve plate. Exhausted from the machine.

Heavy hammer crusher
image
Benefit
1. It has large grain size, large crushing ratio and high efficiency;
2. Simple structure, compact assembly and light weight;
3, the product size is uniform, less broken powder;
4. Easy maintenance and low wear;
5, low power consumption and other advantages, as a medium and fine crushing equipment.
Leave Message
*
*
*
Specifications
Model Rotor specifications(mm) Input port size(mm) Input size(mm) Power(kw) Capacity(t/h) Length*width*heigh(mm)
DLPCZ1308 1310*790 800*850 ≤500 132kw-4 100-160 2818*2100*2390
DLPCZ1512 1500*1160 1200*900 ≤600 (160kw-4)*2 250-400 3220*2520*2800
DLPCZ1615 1675*1510 1480*1200 ≤650 (220kw-4)*2 400-800 3665*2915*3440
DLPCZ1815 1776*1510 1480*1200 ≤650 (220kw-4)*2 400-900 3822*2912*3436
DLPCZ1820 1800*1964 2000*1200 ≤800 800KW-6 800-1500 3474*3822*3520
DLPCZ2125 2100*2486 2600*1690 ≤1200 1250KW-6 2000-3000 5057*4565*4666

Model Rotor specifications(mm) Input port size(mm) Input size(mm) Power(kw) Capacity(t/h) Length*width*heigh(mm)
DLPC0910 900*1000 1070*750 ≤600 (110kw-4)*2 150-200 2600*2200*2050
DLPC1012 1000*1180 1255*810 ≤200 (132kw-4)*2 250-300 2800*2400*2300
DLPC1213 1200*1280 1350*900 ≤200 (160kw-4)*2 300-350 2970*2625*2580
DLPC1216 1270*1490 1530*920 ≤250 (200kw-4)*2 400-500 3070*2840*2580
DLPC1220 1220*1950 2000*920 ≤250 (250kw-4)*2 500-700 3080*3380*2580
DLPC1622 1580*2150 2290*960 ≤300 630kw-6 600-900 4095*3495*2960

RELATED PRODUCTS
Qualifications, specialty, experience
Henan Hongji Mining Machinery Co., Ltd. (HJMAC Group) is specialized in researching and manufacturing mining equipment, construction equipment and their spare parts. HJMAC pursues excelsior on product quality and have approved ISO9001 and SGS. We have perfect after-sale service network and could offer rapid maintenance service...

FOLLOW US

Copyright © Henan Hongji Mine Machinery Co., Ltd. All Rights Reserved

Whatsapp
Tel
Message Top